Aircon servicing Singapore. Done properly.
Honest, transparent aircon servicing Singapore homeowners can actually trust, starting from $20 to $45 per unit. Our 10-step process fully dismantles every unit, jet-washes the parts, and reassembles. Not a quick filter vacuum like some other companies. Same-day appointments available across Singapore from our Bukit Batok hub.
Our 10-step general servicing
This is exactly what happens when our BCA-certified technicians arrive at your home, every time, regardless of how many units. No shortcuts.
Cover the Area Below the Aircon
Floor sheets, drop cloths, and furniture protection go down first. We treat your home like our own, a detail frequently highlighted in our reviews.
Test the Units Before Starting
We turn the unit on, verify airflow, listen for anomalies, and document any baseline issues so we know exactly what we are servicing.
Dismantle the Covers
Front casing, swing flaps, and filter housings are carefully removed. We know the exact clip placements across all major brands.
Flush Water Tray
The drainage tray is inspected and flush. This is where most smelly aircon issues originate from accumulated sludge, mould, and bacteria.
Cleaning of Blower
We vacuum and clean the blower to clean trapped dust. Different brands and models have different configuration which our team will advise.
Clean the Fan Coil Base and Coil
Aluminum fins, base pans, and interior chassis surfaces receive a cleaning.
Washing of Parts & Cover
Every parts, covers, filters are washed. Accumulated dust, mould are completely flushed out.
Dry Everything Completely
No reassembly occurs until components are thoroughly dried. Reinstalling wet parts invites electrical malfunctions and future leaks.
Vacuum the Drainage Pipe
The drainage line is vacuumed clear of bio-buildup and sludge. This prevents the number one cause of water leaks that other companies skip.
Reassemble and Test
All parts are securely refitted, units are powered on, airflow is verified, and ice-cold cooling output is confirmed before departure.
Check the Condenser Unit
We inspect your outdoor compressor (CU), wash down exterior coils, and check fan motor operation at no extra charge.
Check Gas Pressure
Refrigerant pressures are tested using calibrated gauges. If levels are low, we advise you honestly and top up only with your approval.
Our 10-step general servicing
This is exactly what happens when our BCA-certified technicians arrive at your home—delivering fast, reliable cooling without shortcuts.
Cover & Protect Work Area
Floor sheets and protective covers go down first. We treat your home with complete care, keeping your floor and furniture spotless throughout.
Initial Performance Test
We turn on the unit, test initial cooling, check airflow strength, and listen for unusual fan noises to diagnose any baseline issues.
Dismantle Front Casing
Front panels, air filters, and louvers are carefully unlatched. Our technicians know exact clip placements across all major brands to avoid damage.
Thorough Filter Washing
Air filters and front covers are thoroughly washed and scrubbed to strip away dust traps, instantly restoring optimal air intake.
Clean Evaporator Coils
We clean and brush the cooling fins to remove surface dust buildup, helping your unit drop room temperatures much faster.
Sanitize Drainage Tray
The accessible drainage tray area is wiped down and sanitized to reduce unpleasant odours and halt bio-slime buildup.
Vacuum Drainage Line
We high-vacuum the drain pipe to flush out accumulated sludge and bio-jelly, eliminating the #1 cause of water leaking issues.
Blower Wheel & Electrical Inspection
The fan blower roller, electrical terminals, and wiring connections are inspected to ensure safe, balanced, and energy-efficient operation.
Dry & Reassemble Components
All washed panels are wiped thoroughly dry before precise refitting, ensuring zero moisture reaches sensitive internal circuits.
Final Cooling Check & Clean Up
We power on the system, check for cold air delivery, ensure silent operation, and leave your room clean before departure.
Check the Condenser Unit
We inspect your outdoor compressor (CU), wash down exterior coils, and check fan motor operation at no extra charge.
Check Gas Pressure
Refrigerant pressures are tested using calibrated gauges. If levels are low, we advise you honestly and top up only with your approval.
What is included vs priced separately
Complete clarity on our standard service scope so you know exactly what is covered during our visit and what requires supplementary attention.
Included in General Servicing
- ✓ Full unit dismantling (covers, water tray, blower wheel)
- ✓ High-pressure jet wash of all dismantled components
- ✓ Thorough drainage pipe line vacuuming
- ✓ Complete air filter deep cleaning
- ✓ Fan coil base and cooling coil wash
- ✓ Outdoor condenser compressor check and external wash
- ✓ Refrigerant gas pressure gauge inspection
- ✓ Professional reassembly and final cooling test run
- ✓ Protective floor sheets and furniture drop-cloths
- ✓ Meticulous site clean-up before departure
Not Included (Priced Separately)
- ✕ Chemical wash service from $80 per unit
- ✕ Chemical overhaul service from $130 per unit
- ✕ Refrigerant gas top-up (if levels low) from $80
- ✕ Hardware replacement parts (PCB boards, capacitors, fan motors)
- ✕ Copper pipe re-insulation or complete rerouting work
- ✕ Outdoor compressor replacement or major repair
- ✕ New aircon system installation and ductwork setup
1,700+ reasons to trust us.
Verified Google reviews specifically detailing our professional general servicing standards.
★★★★★
“They didn’t oversell and weren’t pushy. Even took out the inner coil which past companies never did. Strongly recommend.”
Wendy CSY
November 2025
★★★★★
“I’ve tried three other companies over 8 years and this is the best so far. They even helped clean the toilet after.”
Norliyana Zainolabidin
October 2025
★★★★★
“They explained that chemical wash was not necessary and I should just opt for normal servicing. Aircon now much cooler.”
Ng Yoke Leng
January 2026
★★★★★
“Finally an honest aircon company that does not overcharge. My 7-year-old AC is good as new again.”
Ken Lim
December 2024
★★★★★
“Honest, efficient and competitively priced. Came on the day of calling. Went beyond job scope to help.”
Ming Jun Soh
January 2025
★★★★★
“Hands down one of the best aircon companies I’ve engaged. Smooth process and very trustworthy.”
Charlotte Chan
February 2026
Aircon servicing FAQ
Quick answers to what most Singapore homeowners ask before booking.
Ready to book your Servicing?
WhatsApp us for the fastest reply, call directly, or fill in the quick form below.
Same-day appointments available across Singapore from our Bukit Batok hub.
Quick Booking, Sends to Our WhatsApp
Other Aircon Servicing & Repair Singapore services
Chemical Wash
Deep clean for stubborn grime, $80 per unit.
Chemical Overhaul
Full disassembly and reset, $130 to $150 per unit.
Gas Top-Up
Restore cooling performance, $80 to $200 typical.
Aircon Repair
PCB boards, leaks, motor issues, $50 diagnosis.
Installation
System 1 to 5, VRV, and commercial setups from $1,000.
Our promise to you
Transparent, upfront pricing. Every job is quoted before we start any work, with clear per-unit rates and no hidden charges.
No upselling, ever. We recommend only the service your unit actually needs. If a standard service is enough, we will not push a chemical wash or overhaul.
Honest advice you can act on. We tell you the truth about your aircon, even when it earns us a smaller invoice.
Proven and accountable. 5.0 stars across 1,700+ Google reviews, 22,000+ jobs completed since 2016, BizSafe Level 3 certified.